Levven Soul Bar Operating Instructions Manual page 6

3.7 POWER ON
1. Install the power cord into Soul Bar.
Power
2. Insert the power cord into an AC outlet.
LED
3. The power LED will indicate that it is powered.
4. Press the gear button to bring the unit out of standby.
5. Either the SKAA Bond LED will be lit dimly or the Bluetooth LED will be lit dimly indicating the
unit is ready to receive a wireless signal from a SKAA transmitter or Bluetooth device.
4. USING SOUL BAR
4.1 MODES
Soul Bar has three modes of operation. Click the gear button to cycle between modes.
SKAA Receive Mode
In this mode, Soul Bar will receive audio from any SKAA transmitter.
Bluetooth Receive Mode
Gear SKAA Bond
In this mode, Soul Bar will receive audio from any Bluetooth device including smartphones, tab-
Button
lets, TVs, PCs, and many others. Soul Bar works as an ordinary Bluetooth speaker. Click the Blue-
tooth button to pair with your phone. Hold the Bluetooth button to clear the paired list.
Bluetooth Relay Mode
In this mode, Soul Bar works the same as Bluetooth receive mode and rebroadcasts the audio to
up to 4 additional SKAA receivers.
4.2 CLUSTERING
Clustering is a way to synchronize the bonding and volume of multiple SKAA wireless audio
receivers, e.g. a Soul Bar soundbar and a Soul Sub subwoofer. Clustered products function as
though they are a single device. When clustered together, any change in volume or source con-
nection applies to all products simultaneously.
One device in the cluster behaves as the master. Any change in volume or source connection to
the master is reflected automatically to the slave devices.
SKAA Bond Bluetooth
LED
Bluetooth
Button Button
Relay
LED LED
Volume -
Button
Volume +
Button
6