Frigidaire FDR251RJS0 Installation Instructions Manual page 14

Operate the Dishwasher
Before you start your dishwasher, check the following:
• Dishwasher is level and securely fastened in place.
• Water supply is turned on.
• No leaking from joints.
• All wire connections are tight.
• Electricity is turned on.
• No kinks in water or drain lines.
• All packing material and customer literature have been taken out of the dishwasher.
Operate the machine through at least one fill and pump-out.
• Check water level after dishwasher has filled completely. Water should fill to the heating element.
• Check for satisfactory pump-out. At end of pump-out, a small amount of water in the bottom of the tub is
normal.
• Check for leaks.
If operation is satisfactory, replace the access panel/toeplate.
NOTE to INSTALLER: Put installation instructions back in the literature packet and leave with
dishwasher so all information will be readily available to user.
NOTE to OWNER: Please read the dishwasher Use and Care Manual. It contains important safety
information for those operating the appliance. It also contains many suggestions for obtaining
the best results from your dishwasher.
14