Frigidaire FDR251RJS0 Installation Instructions Manual page 13

Secure Dishwasher in Opening
The dishwasher must be secured to keep it from tilting when the door is opened. Choose one of the two
methods described below for securing the dishwasher.
Countertop Anchoring:
1. If necessary, adjust leveling screws so mounting brackets touch the underside of the countertop (see
Figure 16).
2. Screw the mounting brackets firmly to the countertop using #8 x
Note: Check levelers to make sure weight of dishwasher rests on floor.
3. Open and close the dishwasher door slowly. If the door hits the mounting bracket screw heads, adjust
front leveling legs.
Floor Anchoring :
This is a difficult procedure. Use only where the countertop mounting brackets cannot be used.
1
1. Screw / " lag screws (not included) through the holes provided in the frame rail (see Figure 16).
4
2. Use expansion fasteners if the floor is concrete.
Countertop Anchoring
Mounting Brackets
Use #8 X 5 / " Phillips
8
head screws (supplied).
Hex End
Wrench or
Socket
3 / "
16
5
/ " Phillips head screws (supplied).
8
13
Floor Anchoring with
1
/ " Lag Screws
4
Figure 16