Frigidaire FDR251RJS0 Installation Instructions Manual page 12

Connect Dishwasher to
Electrical Supply
The appliance MUST be permanently grounded in
accordance with the National Electrical Code and local
codes and ordinances.
Electrical Shock Hazard
Disconnect electrical power at the fuse
box or circuit breaker box before
installing dishwasher.
Failure to do so can result in death or
electrical shock.
1. Remove the junction box cover ( see Figure 15 ).
2. Pull the house wiring in the cabinet area forward to
the junction box. Be sure the electrical cable is
behind the dishwasher motor and rear legs. Use a
UL listed strain relief connector (not included) at
the box.
3. In the junction box, connect the incoming black
lead to the dishwasher's black lead with wire nuts
or suitable connectors (not included). Next,
connect the incoming white lead to the
dishwasher's white lead with wire nuts or suitable
connectors (not included).
4. Attach grounding wire under head of green
grounding screw and tighten screw.
5. Replace the junction box cover.
Junction Box
White Wire to White Wire (Neutral)
Junction Box Cover
12
Through Wall
Through Floor
Through Cabinet
Junction Box
Strain Relief Connector
Green Grounding
Wire and Screw
Black Wire to
Black Wire (Hot)
Relief Bushing
Figure 15