INTRODUCTION Thank you for purchasing the Fiber Optic USB 3.1 AOC Cable. This Cable allows you to transmit USB signals to a distance of up to 30m without external power supply. This cable is a hybrid cable containing both fiber optic and copper cores.. It supports a maximum data rate of 10 Gbps per channel, is light weight, flexible, and has an ultra-small fixed installation bending radius of 20mm.
SAFETY INSTRUCTIONS Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/ guarantee.
Safe operation can no longer be guaranteed if the product: • is visibly damaged • is no longer working properly • has been stored for an extended period in poor ambient conditions or • has been subjected to any serious transport-related stresses. Please handle the product carefully.
FEATURES This AOC Cable has many features that enable it to perform in a superior manner. Among those features you will find: • Extends USB 3.1 signals up to 30 m • Supports all USB 3.1 device types • Works with USB 3.1 Super Speed Host Controllers •...
SPECIFICATIONS Mechanical properties and Environmental performance: Item Units Specified values Tensile strength bis zu 157N (Long-term) Crush resistance N/100mm 1000N (Long-term) Minimum bending radius 20 D* (dynamic) Minimum bending radius 10 D* (static) *D = the diameter of the cable body, in this case it is 4.5mm...
Spezifications Item Description Units Transmitter (Source) Receiver (Display) USB Version USB 3.1 Standard Video Bandwidth 10Gbps. O/E Converter 2 channel 850 nm 2 CH GaAs PD array VCSEL array Connector Type USB AM to Type B Type Cable Type Hybrid type with OM3 fiber and copper wire Cable Outer Diameter 4.5 mm Jacket Outer Material...
OPERATION AND CONNECTION DIAGRAM Attention: The FX-I545 is designed for use with the + 5V passive power supply, provided by the host device through the USB connection. This +5V connection, as well as powering the internal fiber optic module, is also carried through to the other sink via a full stand- ard copper connection.
MAINTENANCE There are no components located inside the product you need to maintain. Never open/dismantle the product. Maintenance, modifications and repairs are to be performed ex- clusively by an expert or at a qualified shop. If you have questions which remain unanswered by these oper- ating instructions, contact our technical support service or other technical personnel.
WARRANTY AND LIABILITY The producer grants 2 years warranty to a new device. As the manufacturer has no influence on installation, warranty only applies to the product itself. If any fault or damage is detected on your product, please contact your dealer and provide your sales slip or invoice as evidence of the purchase, if necessary.
CE CONFORMITY PureLink GmbH hereby declares that the FX-I545-XX Series complies with Directive 2014/30/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: www.purelink.de/ce/FX-I545-XXX_CE.pdf DISPOSAL OF THE DEVICE WEEE-Reg. Nr.: DE 93847290 According to the European WEEE directive, any elec- trical and electronic equipment must not be disposed with consumers waste.
DISCLAIMER This product complies with the statutory national and European requirements. All company names and product names are trade- marks of their respective owners. All rights reserved. We reserve our right for misprints and changes of the device, packing or user`s manual.
Need help?
Do you have a question about the FIBERX FX-I545 and is the answer not in the manual?
Questions and answers