Email: support@dtrovision.com Fax: +1.201.621.6118 www.dtrovision.com www.purelinkav.com For order support, please contact your Distributor or Reseller. For technical support, check with the Dtrovision web site www.dtrovision.com For order support, please contact your local dealer. or contact support@dtrovision.com For technical support, please contact us at...
Page 2
This laser product is inside implemented by using 1300/1550nm optical Figure 6 – Connection of the transmitter to the display module, manufactured by Dtrovision Co., Ltd., which are all certified by IEC/EN60825-1 referred in Accession Number 07-1334-0217 as classified in Figure 7 –...
Page 3
Warranty Information Welcome! Congratulations on your purchase of the PureLink OLC II Optical DVI (Digital 1 (One) Year Warranty Visual Interface) Extension Module. This manual contains information that Dtrovision warrants this optical DVI extension module to be free from defects will assist you in installing and operating the product.
Page 4
System Requirements for Setup Product Specifications Hardware requirements OLC II Optical DVI Extension Modules You have to have a DVI graphic controller or card having a DVI Compliance with standard: Supports DVI1.0, fully port in your PC, SUN or Mac systems. It should support the implemented by fiber-optic communication and DDC2B by virtual maximum graphic resolution feature of displays to be connected.
Page 5
- Ensure that all plugs and jacks used by external power supplies (both operation may result if the start-up sequence is not correctly followed. Dtrovision and others) are firmly connected. Ensure the blue LED ON. - Ensure that the DVI ports are firmly plugged in to the PC and display.
Page 6
Self-EDID Programming Procedure Step 5 Connect LC optical fiber between the transmitter and the receiver as shown in The graphic source equipment generally requires communication of display information figure 4. (EDID). Display information (EDID) contains resolution and timing information for your display.
Need help?
Do you have a question about the PureLink and is the answer not in the manual?
Questions and answers