Behringer RD-8 MKII User Manual page 7

7
RD-8 MKII User Manual
3.1.9 Step & Note Repeat Section
(46)
(39) (40) (41) (42) (43) (44)
(39) 1 – Step or Note repeat of a value of 1.
(40) 2 – Step or Note repeat of a value of 2.
(41) 4 – Step or Note repeat of a value of 4.
(42) 8 – Step or Note repeat of a value of 8.
(43) STEP REPEAT – Repeats the step by the selected value.
(44) NOTE REPEAT – Repeats the note played with the trigger button by the
selected value.
(45) TRIGGER – Trigger repeats when engaged.
(46) 1/2/4/8 – Indication of number of repeats selected.
3.1.11 Voice Control
(52)
(53)
(54)
(55)
(56)
(58)
(52) LEVEL – Level of the 11 voices, plus Accent.
(53) TUNING – Relative tuning of associated voice.
(54) TONE – Applies a filter to the voice reducing the high frequencies as you
turn CCW.
(55) DECAY – Changes the decay time of the voice. Turn CCW for shorter,
CW for longer.
3.1.10 Track Control and Settings
(45)
(47)
(48)
(50)
(51)
(47) MUTE – Activates mute menu.
(48) SOLO – Activates solo menu.
(49) STEP BUTTONS – Used to input step information into patterns and is
(50) SETTINGS – Used in combination with the (49) STEP BUTTONS to select
(51) AUTOFILL – Select and add a fill pattern.
(56) SNAPPY – Adjust the amount of snap sound to the snare sound. Turning CW
(57) VOICE SWITCH – Switch between the two voices available.
(58) VOICE SELECT – Selects the voice for editing patterns, Wave Designer,
(59) OFFSET – Changes the length of the Hand Clap sound.
also used for various system tasks when used in conjunction with the
(50) SETTINGS button or for deeper editing.
different operational modes.
increases snap.
soloing or mute.
(59)
(57)