Kaisai ONE Owner's Manual page 78

Sleep Operation
•
The SLEEP function is used to decrease energy The SLEEP function is used to decrease energy
use while you sleep (and don't need the same
use while you sleep (and don't need the same
temperature settings to stay comfortable). This
temperature settings to stay comfortable). This
function can only be activated via remote control.
function can only be activated via remote control.
Press the SLEEP button when you are ready to
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1
increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F)
hour, and will increase an additional 1°C (2°F) after another hour. When in HEAT mode, the unit
will decrease the temperature by 1°C (2°F) after
after another hour. When in HEAT mode, the unit
1 hour, and will decrease an additional 1°C (2°F)
will decrease the temperature by 1°C (2°F) after
after another hour.
1 hour, and will decrease an additional 1°C (2°F)
after another hour.
The SLEEP function ends after 8 hours and then the
It will hold the new temperature for 5 hours, then
air conditioner will change to the normal operating
the unit will turn o automatically.
mode.
Note: The SLEEP function is not available in
FAN or DRY mode.
Set
temperature
SLEEP Operation
+/- 1 C/2 F
+/- 1 C/2 F
1hr
1hr
Saving energy during sleep
64
56
The device will
7 hours
keep running
until turned off
timer o
by the user.