Normal Operating Sounds - Frigidaire FDB641RAS2 Use & Care Manual

Operating Instructions
Vent
Very Important
Information—
Operating Your Dishwasher!
Normal Operating
Sounds
This dishwasher does not sound like most
dishwashers—IT'S QUIETER!
Your Precision Wash System® dishwasher
uses energy efficient motors for the wash
and drain portions of the cycle you select.
Each cycle has a series of water fills and
drains for washing and rinsing dishes. As
each cycle begins, you may–or may not–
hear the drain motor.
The next sound you will hear is the splashing
water as it enters the tub. Then the lower arm
rotates and circulates water. This is followed
by a pause and a slightly different sound as
the upper arm sprays water. If you listen
closely, you will hear the change in sound as
the wash action switches from one arm to
the other.
PLEASE BE ADVISED: If you compare
this dishwasher to previous models, you
may be surprised at what you DON'T
hear!
Latch
Read Before
Appearance may vary from your model.
Getting Started
1. Load dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher Dispenser
& Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Select desired cycle (See Cycle Chart).
The indicator will show red when selected.
5. Select desired energy OPTIONS (See
Energy Options). The indicator will show
red when selected.
6. Turn dial clockwise to selected cycle.
7. For instructions on connecting the portable
dishwasher, see "Connecting and
Disconnecting the Portable/Convertible
Dishwasher."
8. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
9. To start, close door to latch.
Status Indicator Light
(available on select models)
The HEATING DELAY light means the cycle is
being extended to heat water to proper
temperature in the main wash.
Plate Warmer
For warming dishes and serving plates before
serving hot foods:
• Load clean plates and dishes to be
warmed.
• Turn dial to PLATE WARMER.
• Select HEAT DRY ON option.
4