Setting Up The Monitor; Installation - Philips E Series User Manual

2. Setting up the monitor

2. Setting up the
monitor

2.1 Installation

Package contents
Stand/Base
*USB C-C
* Different according to region.
Note
Use only the AC/DC adapter model:
Philips ADPC20120
Install base stand
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
E Line
343E2E
Quick
Start
Register your product and get support at
www.philips.com/welcome
Monitor
User's Manual
使用产品前请阅读使用说明
Contents:
User's Manual
保留备用 Drivers
www.philips.com/welcome
This product has been manufactured by and is sold
under the responsibility of Top Victory Investments Ltd.,
and Top Victory Investments Ltd. is the warrantor in
relation to this product. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips
N.V. and are used under license.
AC/DC Adapter
* CD
* HDMI
* DP
2. Hold the base stand with both
hands and firmly insert the base
stand into the base column.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
3
Prevent Tipping
When using the display, fasten the
LCD to a wall using a cord or chain that
can support the weight of the monitor
in order to prevent the monitor from
falling.
Cord or chain
5