Miele F 2414 SF Operating And Installation Instructions page 63

Checking the WLAN connection sta-
tus
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select Connection status
to confirm your selection.
Information about the WLAN connec-
tion status will then appear on the dis-
play:
-  connected: there is a strong con-
nection
-  connected: there is an average
connection
-  connected: there is a weak con-
nection
-  disconnected
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your appliance.
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select Set up again
confirm your selection.
Reset configuration?
display.
 Use the  and  sensor controls to
select or
Yes No
confirm your selection.
and select OK
and select OK to
will appear on the
and select OK to
Selecting additional settings
Resetting the network configuration
Reset the refrigeration appliance's set-
tings to the default settings when dis-
posing of your refrigeration appliance,
selling it, or putting a used refrigera-
tion appliance into operation. This will
reset the network configuration so that
all personal data is deleted from the
refrigeration appliance. This will also
ensure that a previous owner is no
longer able to access the refrigeration
appliance.
 Reset the settings of the refrigeration
appliance as described under "Reset-
ting the settings to their default set-
tings ".
63