Miele F 2414 SF Operating And Installation Instructions page 62

Selecting additional settings
Connecting your refrigeration appli-
ance via WPS
Your router must be equipped with the
WPS function for this connection op-
tion.
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
Set up will appear on the display.
 Confirm your selection with OK.
 Use the  and  sensor controls to
select via WPS
firm your selection.
 Now follow the instructions on the
display.
 Confirm the process with OK.
To be able to use the Miele@home
functions, you also have to register
your refrigeration appliance in the app.
 As soon as your refrigeration appli-
ance has been integrated into your
home network via WPS, the message
Connection successful
the display.
 Confirm the process with OK again.
If the WLAN connection is active,  will
appear on the display.
62
and select OK to con-
will appear on
Deactivating Miele@home
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select
Deactivate
confirm your selection.
Deactivation successful
display.
 Confirm the message with OK.
Your refrigeration appliance is now dis-
connected from your WLAN network.
The  symbol will go out on the dis-
play.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to reac-
tivate the connection.
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select Activate
firm your selection.
Activation successful
display.
 Confirm the message with OK.
If the WLAN connection is active,  will
appear on the display.
and select OK to
will appear on the
and select OK to con-
will appear on the