ASROCK X300D4-P1/DASH User Manual page 38

X300D4-P1/DASH
Graphic Configuration
GFX Clock Frequency
(Only for processor with integrated graphics)
This item allows you to alter the frequency for the GFX clock frequency. After you
alter the GFX Clock Frequency settings, make sure to adjust the GFX Core Voltage
settings.
*The adjustable range is dependent on the CPU being installed.
GFX Core Voltage
(Only for processor with integrated graphics)
This item allows you to alter the voltage for the GFX Core Voltage.
*The adjustable range is dependent on the CPU being installed.
DRAM Timing Configuration
DRAM Information
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically. Setting DRAM Frequency can
adjust DRAM Timing.
Infinity Fabric Frequency and Dividers
AMD Overclocking Setup Set Infinity Fabric frequency (FCLK). Auto: FCLK =
MCLK. Manual: FCLK must be less than or equal to MCLK for best performance in
most cases. Latency penalties are incurred if FCLK and MCLK are mismatched, but
sufficiently high MCLK can negate or overcome this penalty.
DRAM Timing Configuration
Voltage Configuration
CPU Vcore Voltage (Offset)
Configure the voltage for the CPU Vcore (Offset).
VDDCR SOC Voltage (Offset)
Configure the voltage for the VDDCR SOC (Offset)
DRAM Voltage
Configure the voltage for the DRAM Voltage.
Performance Mode
Use this to enable or disable performance mode The default value is [Disabled].
33