Using The Supplied Accessories; Use; Brush Retracted - Miele HS10 Operating Instructions Manual

 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the timestrip® filter change in-
dicator works
The timestrip® filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50 oper-
ating hours the display will be com-
pletely filled with red (Fig. 14). 50 oper-
ating hours equates to approximately
one year of use.

Using the supplied accessories

(Fig. 15 + 16)

Dusting brush

Upholstery nozzle

Crevice nozzle

Accessory holder for the 3 ac-
cessories supplied
Symbols on the holder show where to
attach the different accessories.
 Attach the accessories holder to the
suction tube when required (Fig. 16).
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
- AllergoTeQ floorhead
- Turbobrush
These are supplied with their own oper-
ating instructions.

Use

Adjusting the floorhead
(Fig. 17, 18 + 19)
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the floorheads illustrated.
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard floors.
Miele offers a range of other floorheads,
brushes and accessories for other types
of flooring and special applications (see
"Optional accessories").
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
Clean even hard floors which are not
susceptible to scratching, as well as
flooring with gaps or deep crevices in it
with the brush protruding:
 Press the  footswitch.
Vacuum carpets and rugs with the

brush retracted:

 Press the  footswitch.
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier
to manoeuvre (see "Use" – "Regulat-
ing the suction power").
Adjustable floorhead (Fig. 20)
The adjustable floorhead can also be
used for vacuuming the stairs.
en
39