To Copy Reservations; To Confirm Reservations; To Deactivate And Reactivate Weekly Timer Operation; To Delete Reservations - Daikin CTXM15R2V1B Operation Manual

Hide thumbs Also See for CTXM15R2V1B:
Table of Contents

Advertisement

5 Press
.
Result: The OFF/ON timer mode is set.
blink.
Note: Press
to return to the previous screen. If blank is
selected, continue to step 9.
6 Press
or
to select the time. The time can be set
between 0:00~23:50 in 10-minute intervals.
7 Press
.
Result: The time is set and
blink.
Note: Press
to return to the previous screen. If OFF timer
is selected, continue to step 9.
8 Press
or
to select the desired temperature.
Note: The set temperature for the weekly timer is displayed only
when setting the weekly timer mode.
INFORMATION
The temperature can be set between 10~32°C on the user
interface, however:
▪ in cooling and automatic operation mode, the unit will
operate at minimum 18°C even if is set at 10~17°C;
▪ in heating and automatic operation mode, the unit will
operate at maximum 30°C even if is set at 31~32°C.
9 Press
.
Result: The temperature and time are set for the ON timer. The
time is set for the OFF timer. The timer lamp lights orange.
Result: A new reservation screen will appear.
10 Repeat the previous procedure to set another reservation or
press
to complete the setting.
Result:
is displayed on the LCD.
Note: A reservation can be copied with the same settings to another
reservations" [ 4  11].
day. Refer to
"5.10.2 To copy
5.10.2

To copy reservations

A reservation can be copied to another day. The complete
reservation of the selected day of the week will be copied.
1 Press
.
2 Press
or
to select the day of the week to be copied.
3 Press
.
Result: The reservation of the selected day of the week will be
copied.
4 Press
or
to select the destination day.
5 Press
.
CTXM15+FTXM20~42R5V1B + CTXM15+FTXM20~71R2V1B
Daikin room air conditioner
3P485919-11S – 2020.06
Result: The whole reservation is copied to the selected day and the
timer lamp lights orange.
and the time
Note: To copy to another day, repeat the procedure.
6 Press
Result:
and the temperature
Note: To change the reservation setting after copying, refer to
"5.10.1 To set Weekly timer
5.10.3
You can confirm if all reservations are set to your needs.
1 Press
2 Press
Note: To change the reservation setting, refer to
Weekly timer
3 Press
5.10.4
1 To deactivate the Weekly timer, press
Result:
off.
2 To reactivate the Weekly timer, press
Result: The last set reservation mode will be used.
5.10.5
To delete individual reservations
Use this function if you want to delete a single reservation setting.
1 Press
2 Press
3 Press
4 Press
5 Press
6 Press
to complete the setting.
is displayed on the LCD.
operation" [ 4  10].

To confirm reservations

.
Result: The day of the week and the reservation number of the
current day are displayed.
or
to select the day of the week and reservation
number to be confirmed and check the reservation details.
operation" [ 4  10].
to exit the confirmation mode.
To deactivate and reactivate Weekly timer
operation
is displayed on the LCD.
disappears from the LCD and the timer lamp goes

To delete reservations

.
Result: The day of the week and the reservation number are
displayed.
or
to select the day of the week to be deleted.
.
Result:
,
, and
blink.
or
and select "blank".
Result: The setting will change as follows:
.
Result: The selected reservation is deleted.
to exit.
5 Operation
"5.10.1  To set
while
again.
Operation manual
11

Advertisement

Table of Contents
loading

Table of Contents