3-14 Icemaker replacement
1) Remove 3 screws marked in the picture below.
2) Grasp the bottom of motor cover assembly and pull it out
slowly to remove.
3) Disconnect wire harness from wall of compartment.
3-15 CAP DUCT MOTOR REPLACEMENT
1) Separate the Housing of the Cap Duct Motor.
2) Unscrew 3 screws to disassemble the motor.
3) When replacing the motor, check the position of the door
duct and the link for proper fit.
4) Insert 3 screws.
5) Push housing aside.
- 12 -
- 12 -
Duct Door
Link
Cap Duct Motor
NG Position
Copyright © 2016 - 2017 LG Electronics Inc. All
rights reserved. Only training and service purposes.