Icemaker Replacement; Sub Pcb For Working Dispenser - LG LFX31915 Series Service Manual

3-13 ICEMAKER REPLACEMENT

1) Remove 4 screws as shown.
2) Grasp the bottom of motor cover assembly and pull
slowly.
3) Disconnect wire harness from wall of compartment.
CAUTION: Make sure that the motor housing is taped to
the mold, if not positioned correctly the cover will not fit
properly.

3-14 SUB PCB FOR WORKING DISPENSER

1) Disconnect the wire harness.
2) Remove 1 screw from PCB and replace with new PCB.
In-door
motor
- 11 - - 11 -