Charging The Internal Battery; Operating Instructions - MAC TOOLS MTPROG Operation And Maintenance Manual

CHARGING THE INTERNAL BATTERY OF THE JUMP STARTER
IMPORTANT: CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE AND EVERY 30 DAYS TO KEEP THE JUMP STARTER'S
INTERNAL BATTERY FULLY CHARGED. CHARGE THE JUMP STARTER INDOORS ONLY.
Use only the included power cord.
•
To reduce the risk of electric shock, unplug the jump starter before attempting any maintenance or cleaning.
•
When charging the internal battery, work in a well-ventilated area and do not restrict the ventilation in any way.
•
LED INDICATORS
Internal Battery Status
•
Make sure the jump starter is not connected to a power source or a vehicle battery.
Press the Battery Status button
•
Red – Charge now
•
Yellow – Charge soon
•
Green – Ready for jump start
Charging Status
•
Connect the jump starter to a live power source.
•
Blinking Yellow – Battery is charging
•
Solid Green – Battery is fully charged
Charging Percentage
•
While the unit is charging, press the Battery Status button
The LEDs indicate the charging percentage.
•
Red – 1-49% charge
•
Yellow – 50-89% charge
•
Green – 90% or higher charge
Combined Internal Battery and Vehicle Battery Charge
•
Connect the jump starter to a vehicle battery and press the Battery Status button
The LEDs will show the combined internal battery and vehicle battery charge.
NOTE: this is not a true reading.
•
Red – Charge now
•
Yellow – Charge soon
•
Green – Fully charged
Charging The Internal Battery, Using the Built-In Charger
•
Charge the internal battery for the jump starter using the included power cord.
WARNING! USE OF AN IMPROPER POWER CORD MAY RESULT IN A RISK OF FIRE
AND ELECTRIC SHOCK.
1. Connect the power cord to the AC charging socket on the side of the jump starter.
2. Plug the power cord into a 120-240VAC electrical wall outlet.
3. While the jump starter is charging, the yellow LED will blink.
4. Complete charging may take up to 12 hours. When the yellow LED turns off and the green LED lights, the jump starter
is ready to use.
5. When the internal battery is fully charged, the charger will automatically go into maintain mode and maintain the battery
at full charge.
6. Charge the jump starter as soon as possible after use.

OPERATING INSTRUCTIONS

Jump Starting a Vehicle Engine
•
IMPORTANT: Using the jump starter without a battery installed in the vehicle may damage the vehicle's electrical system.
IMPORTANT: Do not use the jump starter while charging the internal battery.
WARNING! A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION.
TO REDUCE THE RISK OF A SPARK NEAR THE BATTERY:
1. Turn the vehicle's ignition OFF before making cable connections.
2. Position the jump cables to reduce the risk of damage by the hood, door and moving of hot engine parts.
on the front of the jump starter.
.
.
5