Connection Of The Pv Array - Victron energy EasySolar-II GX Product Manual

EasySolar-II GX - Product Manual
• Connect the battery cables. First the - cable then the +. Be aware that there may be a spark when making the battery
connections.
• Tighten the nuts to the prescribed torques for minimal contact resistance.

8.4. Connection of the PV array

1. Confirm correct PV polarity
2. Remove the Solar connection cover
3. Connect the solar array to the M6 solar bolts.
NOTE: if connected with reverse polarity, the PV voltage will drop, the controller will heat up but will not charge the battery.
Page 12 Installation