www.glp.de
Features
Dimming
16-bit dimming control is provided. You can select from two dimming curves using the
control panel or the Control / Settings DMX channel, see Figure 8:
Figure 8. Dimming curves
● Linear sets dimming so that it appears to increase and decrease evenly throughout
the dimming range.
● Soft gives finer control at low light levels and coarser control at high light levels.
The default setting is Soft.
Strobe / shutter
A variety of strobing and fading effects can be produced by the fixture.
Prism
A three segment prism allows beam splitting effects. The prism can be independently
inserted in the beam path or removed, and can be continuously rotated in either
direction or set to an indexed position.
Frost
A variable amount of frost / diffusion can be added to the light beam
Focus
Variable focus allows you to focus the output on Gobo wheel 1, Gobo wheel 2 or
create gobo morph effects by moving focus between two gobos.
Zoom
The beam size can be controlled between 7 degrees and 30 degrees. A menu option
allows you to reverse the operation of the zoom control.
24
EXO Spot 30 User Manual Rev. A