Motorola moto e7 power User Manual page 144

Network and internet
Connect devices to hotspot
1. Check that cellular data is
share.
2. Go to Settings > Network & internet > Hotspot & tethering.
3.
Touch Wi-Fi hotspot and turn it on
drains the battery!
When your hotspot is active, you'll see
4. Set up the connection.
To connect Do this
A phone a.
b.
Other device a.
b.
c.
Tip:
The first time you turn the hotspot on,
down and touch
Manage hotspot connections
To see the number of devices connected to your hotspot:
•
In quick settings, look below
• Or, go to Settings > Network & internet > Hotspot & tethering and look under Wi-Fi hotspot.
By assigning a password
your knowledge or permission.
To disconnect all devices and prevent them from reconnecting:
1. Turn the hotspot off.
2. Change the password.
3. Turn the hotspot back on to continue using it.
Tip: When no devices are connected, the hotspot turns off automatically. To adjust this setting, go to
Settings > Network & internet > Hotspot & tethering > Wi-Fi hotspot > Advanced > Turn off hotspot
automatically.
on. If cellular data is off, your phone doesn't have an internet connection to
On your phone, next to the hotspot's name, touch
Use the other phone's camera to scan the QR code that provides the password.
Open the device's Wi-Fi settings.
Select your phone's hotspot.
Enter the hotspot password.
to turn the hotspot off/on.
.
for your hotspot, you ensure that people can't connect to your hotspot without
, then plug in your phone to charge. Using the hotspot really
in the status bar.
Learn how to find the hotspot's password.
is added to quick settings. After that, just swipe the status bar
and unlock if prompted.
135