Summary of Contents for Fluid Management Accutinter 7000HS
Page 1
Accutinter 7000HS | End User Guide Getting Started Maintenance and Care Troubleshooting Warranty...
Page 3
Fluid Management can give you the answer. Fluid Management is a global leader in dispensing and mixing equipment used in the paint industry, as well as, specialized equipment for the food and beverage, chemical, health and beauty, and home improvement industries.
Page 4
Fluid Management assumes no responsibility with regard to the performance or use of these products. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 2 | Accutinter 7000HS...
Place the computer and monitor so that nothing blocks the air vents. Allow 4 inches (101.6 mm) clearance around air vents. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 6 | Accutinter 7000HS...
(2) this device must accept any interference received, including interference that and that you have positioned may cause undesired operation. the connector correctly in relation to the port. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 7...
Environmental conditions are strictly based on the types of colorants used (information provided by paint manufacturer). The specifications shown are for the machine only. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 8 | Accutinter 7000HS...
Use the foot pedal to adjust the shelf. Position the container near the nozzle prior to dispense Keep ColorPro software current DO NOT load screen savers onto your Accutinter 7000HS computer/monitor. Adding this and other software may conflict with ColorPro and effect dispense operation ...
Getting Started Installation Your Accutinter 7000HS has been designed for quick set up. If you have never used an Accutinter dispenser or are new to paint dispensers, read this section for instructions on getting started and installing your machine. If you are an experienced user, you may already know enough to get started. Be sure to look over the information in the “Welcome to ColorPro”...
Place the monitor and keyboard on the keyboard support on the top right side of the machine. See Figure 1. FIGURE 1 Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 11...
Page 14
Complete an initial manual dispense for each colorant. (See “Getting Started: Preparing and refilling the canisters” on page 16). Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 12 | Accutinter 7000HS...
Connecting the label printer (optional) The label printer software for the label printer is installed on the computer by Fluid Management. All you need to do is connect the printer cables to the computer and to a dedicated power outlet. The original packaging from the printer vendor includes the software, a quick start guide with detailed instructions, and the necessary cables.
NOTE! If the keyboard cable is a USB, add is marked. an adapter and connect the two cables. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 14 | Accutinter 7000HS...
Page 17
Barcode”, you have successfully enabled if you are using barcodes to identify the bar code scanner. formulas from other color chips. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 15...
• DO NOT dispense without a container in place. • DO NOT use shelf surface to seal open cans. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 16 | Accutinter 7000HS...
Page 19
Repeat entire process for each canisters by entering the amount of colorant empty canister. you added in the text box. Press Enter. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 17...
Foot pedal Press the foot pedal to adjust the shelf. Position the container near the nozzle prior to dispense. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 19...
• All functions can be conducted with mouse or keyboard • ColorPro translated into a variety of operator languages Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 20 | Accutinter 7000HS...
ColorPro and Accutinter questions. About Click here to see ColorPro and Accutinter information. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 21...
Prompt will appear confirming dispense. To dispense another container of the same formula, choose Dispense (F2). Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 22 | Accutinter 7000HS...
Page 25
(optional). needed for a job. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 23...
Dispense now by selecting Dispense (F2). Send to Queue Choose to dispense the formula later by selecting Send to Queue (F10). Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 24 | Accutinter 7000HS...
(F3) to dispense the Change (F2) to original formula plus dispense the adjusted amounts. incremental added colorant amounts. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 26 | Accutinter 7000HS...
(F3) to dispense the Change (F2) to formula settings. original formula plus dispense the adjusted amounts. incremental added colorant amounts. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 27...
Environmental Conditions: Operating temperature between 50 F (10 C) and 104 F (40 The A-weighted sound pressure is below 70 dB. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 31...
2- Purge the colorant line. 3- Repeat if necessary. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 32 | Accutinter 7000HS...
Page 35
( see page clumpy. ). The colorant should come out of the nozzle in a steady stream. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 33...
Page 36
If no, plug the dispenser into a erratically or not at all. dedicated line? dedicated 115 or 220 Volt line. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 34 | Accutinter 7000HS...
Page 37
…Are all the cables securely attached between the computer and the keyboard? …Does the keyboard need Replace the keyboard. replacing? Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 35...
30 seconds and turn the computer back on. If you still receive the message, call Customer Service. Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 36 | Accutinter 7000HS...
Page 39
If you suspect a problem Contact your department manager or store manager. with the colorants... Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 Accutinter 7000HS | 37...
Customer Service for information about how to obtain warranty service. Date of purchase: Model Number: Serial Number: Your Service Technician’s Name: Fluid Management Customer Service 1 . 8 00 . 4 62 . 2 466 38 | Accutinter 7000HS...
The first year of the warranty period covers parts and labor. If any Paint Equipment fails during normal operation, use and service during the first year of the warranty period due to a defect in material or workmanship, Fluid Management will repair the defective Paint Equipment and replace any defective parts at no charge to the Customer.
Page 42
Fluid Management’s warranty transfers to the new owner with transfer of ownership Paint Equipment. It is the responsibility of new owner to notify Fluid Management at 1-800-462-2466 of the transfer of ownership of Paint Equipment. Transfer of ownership does not extend the warranty period.
Page 43
REPRESENTATIVES WAS AWARE OF OR ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY EVENT, FLUID MANAGEMENT’S TOTAL LIABILITY IN CONNECTION WITH ANY INDIVIDUAL ITEM OF PAINT EQUIPMENT SHALL LIMITED TO THE NET PRICE PAID TO FLUID MANAGEMENT FOR SUCH ITEM OF PAINT EQUIPMENT. ...
Page 45
Do not attempt to lift or remove canisters from spill tray. Step 3 Spilled or excess liquids should be removed immediately. Step 4 Replace damaged decals. If O-rings (on select machines) are damaged, contact Fluid Management to replace them.
Page 46
Accutinter 7000 Fluid Management, Inc. 1023 Wheeling Road • Wheeling IL 60090 p: 800.462.2466 f: 847.537.3221 www.fluidman.com...