Page 2
Use of Fluid Management trademarks, service marks, or logos for commercial purposes without the prior written consent of Fluid Management may constitute trademark infringement and unfair competition in violation of federal and state laws. Fluid Management, FMDirect, ColorPro, DVX, Harbil, Blendorama, Accutinter, Duraflow, Fast & Fluid Management, GyroFlex, GyroMixer, MicroTint, TintMaster, V1, and VR1 are trademarks of Fluid Management, registered in the U.S.
Page 3
FLUID MANAGEMENT LP. ("SELLER"), SELLER will supply identical or substantially similar replacement equipment or parts, or at SELLER's option, will repair or allow credit for such equipment.
In this guide, you’ll find How to Use this Guide more information to help you get the For Your Safety most from your new Fluid Management Important Safety Information NSC80 Dispenser. Information and Instruction Labels Safety Notice Information...
ALWAYS make sure that the power is turned off and the machine is unplugged before you attempt to replace any components on your dispenser. If you have any questions or concerns, contact Fluid Management Customer Service | Harbil NSC80 Series ...
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Harbil NSC80 Series | 7 Fluid Management Customer Service 1.800.462.2466...
Bottom electric driven agitation making it easier • to fill colorant and reduce the risk of canisters being left open when removed from the dispenser. | Harbil NSC80 Series Fluid Management Customer Service 1.800.462.2466...
Page 9
Important Safety Information Your Harbil NSC80 is a compact manual colorant dispenser that was designed for exceptional reliability and ease of use. It is a nearly maintenance free device that should deliver many years of reliable service. Its features include: •...
Page 10
Assembling the Machines Your Harbil NSC80 Compact Color Dispenser requires only the simple attaching of the individual canisters to the turntable or fastening to the in-line base. Do not fill the canisters with colorant before they are mounted on the base.
3. Slowly press the pump handle all of the way down to the bottom of its stroke. 4. Repeat these steps five (5) times. 5. Repeat steps 1 through 4 for each of the remaining canisters. Fluid Management Customer Service 1.800.462.2466 Harbil NSC80 Series | 11...
The pump must then be re-primed (see Priming the Pumps) before starting the measuring procedure again. Fluid Management Customer Service 1.800.462.2466 | Harbil NSC80 Series...
For large paint orders, it can be easier to remotely tint paint directly into the 5-gallon cans instead of lifting them onto the dispenser. The canisters can be removed from the turntable with the following steps. Press Button to Release Canister Fluid Management Customer Service 1.800.462.2466 Harbil NSC80 Series | 13...
4. The same stops can be used when customers request multiple quarts, 1- gallons or 5-gallon of the same color. 5. When finished, loosen each black dial on the repeatability gauge and lower to their original location. | Harbil NSC80 Series Fluid Management Customer Service 1.800.462.2466...
Page 15
Clean nozzle closers and inspect sealing pads. o Open nozzle closer, pull towards you and clean using soap and water. o Return nozzle closer into canister, which will click into place. o Close nozzle closer. Harbil NSC80 Series | 15 Fluid Management Customer Service 1.800.462.2466...
The Pump Repair Kit (P/N 4223212) can be purchased from the Fluid Management Customer Service Department. A colorant leak at the bottom of the pump assembly generally indicates that the pump assembly has been damaged. In this case, the valve assembly must be replaced with the Thiokol Repair Kit (P/N 4231011).
The serial plate is located on the side panel of the machine. It includes the serial and model numbers for your machine. Please make a note of these numbers below: Date of purchase: Model Number: Serial Number: Harbil NSC80 Series | 17 Fluid Management Customer Service 1.800.462.2466...
Page 18
| Harbil NSC80 Series Fluid Management Customer Service 1.800.462.2466...