Position Clock; Specifications - La Crosse Technology 513-1417v4 Manual

Atomic digital clock with temperature and moon phase
Hide thumbs Also See for 513-1417v4:
Table of Contents

Advertisement

Position Clock

The clock has a pullout stand to sit on a desk or table, or openings on
the back to mount on a wall.
For best Atomic time reception orientate the clock with the front or
the back facing Ft. Collins, Colorado.
Choose a location 6 feet or more from electronics such as cordless
phones, gaming systems, televisions, microwaves, routers etc.
Place within range of the outdoor sensor (300 feet open air).
Restart
When the outdoor readings show dashes:
• Bring the sensor in the house five feet from the station.
• Remove batteries from the sensor, and the batteries from the clock.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor, and into the clock.
• Wait 15 minutes to establish a strong connection.
• Place sensor outside in shaded location.

Specifications

Indoor
Outdoor
Range
Update
Power
Battery Life
Dimensions
513-1417v4
32 ˚F to 122 ˚F | 0 ˚C to 50 ˚C
-40 ˚F to 140 ˚F | -40 ˚C to 60 ˚C
Over 300 ft. (91 meters) RF 433MHz (open air)
Every 58 seconds
Clock: 2 AA (LR6, IEC) batteries not included
Sensor: 2 AA (LR6, IEC) batteries not included
12 months with reputable batteries
Clock: 11.10" W x 1.14" D x 6.75" H
(28.19 W x 2.89 D x 17.15 H cm)
Sensor: 1.57" L x 0.79" W x 5.12" H
(13.0 X 3.98 X 2.0 cm)
www.lacrossetechnology.com/support
Page | 6

Advertisement

Table of Contents
loading

Table of Contents