Table of Contents
Advertisement
To interrupt playback:
Press the
button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the
( /RETURN) button.
To remove the CDs:
Whilst in the stop mode, press the
OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The following playback functions are the same as video CD opera-
tions.
Direct search system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Repeat or random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Note:
Whilst in the "VCD ON" state, you cannot play back audio CDs.
Caution:
z Do not place two CDs in one disc tray.
z Do not push the disc tray whilst it is moving.
z Do not turn the disc tray by hand. This may cause malfunctions.
z If the power fails whilst the tray is open, wait until the power is restored.
z If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the
unit will not function. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.
z If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
„ To locate the beginning of a track
/SELECT/RESUME button.
To move to the beginning of the next track:
Press the
To restart the track being played:
Press the
Notes:
z You can locate the beginning of a track on a single disc only.
Page
z The
PREV. or NEXT
beginning of a track.
„ To locate the desired portion
For audible fast forward:
Press and hold down the
For audible fast reverse:
Press and hold down the
Notes:
z Normal playback will resume when the
z The
or
tion.
z You can locate the desired portion on a single disc only.
z When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
/
button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
/
button repeatedly until the desired
track number appears.
/
button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
/
button repeatedly until the desired
track number appears.
button on the remote control allows you to locate the
/
button during playback.
/
button during playback.
/
or
/
button on the remote control allows you to locate the desired por-
01/9/28
CD-BK147V(S)E3.fm
CD-BK147V
button is released.
ENGLISH
E-25
Advertisement
Table of Contents
