Enabling Multiple Displays - ATI Technologies Radeon CrossFire X850 User Manual

Connection
Type
Slave Card with
two DVI-I
connectors
Slave Card with
one DVI-I and
one Honda
connector
Slave Card with
one DVI-I and
one VGA
connector
To connect your monitors
1
Power off your computer and monitors.
2
Plug the monitor cables into their appropriate connectors.
3
Power on your monitors first, and then restart your computer.

Enabling Multiple Displays

Use the Displays Manager of the Catalyst™ Control Center to enable
multiple displays. The Displays Manager is available in both Standard and
Advanced views of the Catalyst™ Control Center.
Enable a secondary display device
• Click the Wizard button and follow the instructions to enable
Clone Mode.
Display Comments
Configuration
DFP display DFP - digital flat panel display using
non-TMDS connector.
Digital HDTV If the HDTV display supports the
connection type, it can be used as a
flat panel display using a DVI-I
connector.
CRT using DVI- CRT - cathode ray tube analog display.
I-to VGA
adapter
Analog HDTV Not supported using a smart dongle.
VIVO VIVO functionality is not supported on
the Slave graphics card.
Digital HDTV If the HDTV display supports the
display connection type, it can be used as a
flat panel display by connecting the
Composite Video inputs to the Honda
connector.
CRT display
Display Configurations 27