Page 1
CONJUNTO UCM/ UCM UNIT/ ENSEMBLE UCM/ BAUGRUPPE UCM/ SD-BOX + QUASAR T25 A3 + ASG UD INSTRUCCIONES DE USO Y MANUTENCIÓN/ INSTRUCTIONS FOR USE AND MAINTENANCE/ INSTRUCTIONS D’USAGE ET ENTRETIEN/ GEBRAUCHS- UND WARTUNGSANLEITUNG/...
Page 3
ASSEMBLY ..............................6 MAINTENANCE ............................6 _________________________________________________________ Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/...
• The SD-BOX + QUASAR T25 A3 + ASG UD unit is valid for installations where the P/Q ratio is above 0.7. • When a UCM occurs, a qualified technician is required for the installation to be operative again. Once the problem causing the UCM has been solved, the reset button must be pressed in order to restore the safety series and for the system to be operative again.
• In the case of checking the installation or carrying out a manual rescue, it must be checked that the SD-BOX is set at the correct operation mode for each of these situations so as to prevent unwanted jamming in the safety wears.
Page 6
UCM, and a micro-switch, which indicates the interlocking system’s positioning to the SD-BOX. Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/...
Page 7
By using these inputs, if the SD-BOX detects that the car leaves door level with doors open, the contactor in the safety line is activated, which causes the QUASAR T25 A3 governor’s parking system coil to de-energise. This will make the parking system interlocking system operate on the governor’s centrifugal systems, thus causing the...
T-25 steering mechanism’s handle. Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/...
Page 9
Visual inspection is enough. Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/...
Need help?
Do you have a question about the SD-BOX and is the answer not in the manual?
Questions and answers