Xylem Rule Mate RM500A Instruction Manual page 18

Install to ABYC
All mounting holes must be
sealed with a marine grade
H-22 and E-11
sealant to prevent water
intrusion.
We hereby declare, under our sole responsibility, that our product to which this
declaration relates has been designed to comply in accordance with the following
Directives:
Electromagnetic Compatibility Directive 2004/108/EC
Recreational Craft Directive 2003/44/EC
RoHS 2011/65/EU
With the relevant selections of the following Standards:
ISO 8846:1990 / Ignition Protection
ISO 8849:2003 / Electrically Operated DC Bilge Pumps
ISO 10133:2012 / Extra Low Voltage D.C. Installations
ISO 15083:2003 / Bilge Pumping Systems
This product is intended to be used in Bilge Pumping System for small craft with a hull
length up to 24 meters, as described within the introduction and scope of ISO 15083.
Install following the Provisions of the Recreation Craft Directives 2003/44/EC
18