Razor Turbo A Manual page 54

EN
HOW TO RIDE
Standing in the center of the deck while the power is on, engages the foot-controlled power system.
Do not activate the foot-controlled power system (pressure sensor is located under deck grip tape)
unless you are on the Turbo A and in a safe, outdoor environment suitable for riding.
Press the power button (A), the LED will light up.
Get on the scooter and place both hands on the handlebars. Kick to start (B).
HOW TO STOP
For controlled stops, apply the brake by putting pressure on the rear-fender brake. Razor recommends
that you practice applying the brake at various speeds and in an open area free from obstructions
before riding your scooter around others.
53
NOTE: Electric
scooter must be moving
at least 5 km/h (3 mph)
while engaging the foot-
controlled power system to
engage motor.
NOTE: As an additional
safety feature, the scooter is
designed to cut power to the
motor when the brake
is applied.
NOTE: Motor will re-engage,
(without having to kick to
start), if brake is released and
foot-controlled power system
is applied before scooter
has slowed down to under 5
km/h (3 mph).
NOTE: Practice riding only
in wide open areas clear
from curbs, parking blocks
and other obstacles.
Impacting the wheels
against any hard surface can
damage the wheels. Wheels
are not covered under the
limited warranty.