Beko DIN Series User Manual page 31

Feature can be activated if automatic
detection is desired.
To activate / to deactivate:
1. After turning on the machine, press
Time Delay and P keys simultaneously.
Keep them pressed until the
countdown 3, 2, 1 is completed on the
display.
2. Press P key to activate the a: option.
Automatic detergent detection feature
is disabled at "a:0" option and enabled
at "a:1" option. Set the desired option
by pressing the Time Delay key.
3. Turn off the machine with On/Off key to
save the changes.
Changing Warning Sound Volume
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the S:
position on the display.
3. Each pressing on the Time Delay key
will change the warning sound volume
as "S:0" off, "S:1" medium and "S:2"
high.
4. Switch off the machine with the On/Off
key to save the changes.
Your machine is set to "S:2" as factory
default.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the L:
position on the display. Interior lighting
is off in "L:0" position and on in "L:1"
position. Select the position you want
with the Time Delay key.
3. Switch off the machine with the On/Off
key to save the changes.
SelfDry
(Depends on the Model)
Thanks to the "SelfDry" feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely "OFF" and
"ON".
You may use sub-menu settings to change
"SelfDry" settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
Auto door opening feature opens the
doors at the end of the washing cycle
thanks to the "door opening shafts".
This process takes about 2 minutes.
Do not force to close the door if the
power is interrupted while the shafts
are moving out. Operation shall be
completed and shafts shall be retracted
when the power is restored.
SelfDry function may cause changes to
the cycle time.
31/EN