Download Print this page

Flourish TRIMLINE CANOPY 10' x 15' Instructions For Assembly

Advertisement

Quick Links

Video instructions are available on our website!
Go to: flourishdisplays.com/instructions or scan this code with your QR
Code Reader App for a direct link to our instructions and videos.
Please, assemble the TrimLine at home the first time, not at an event.
15 foot Front
Before beginning assembly of your TrimLine,
please take time to review the enclosed Parts
List to familiarize yourself with the TrimLine
and to confirm that all parts are present.
Also, review these instructions along with the instructions for any accessories or options you have
purchased, such as Awning or Rear Door assemblies. Parts for TrimLine accessories often need to be
installed during set up of the canopy. Reviewing all instructions before beginning set up will help
ensure that you have the necessary accessory parts in place as you set up your TrimLine.
***The TrimLine Canopy can be set up by one person, but as with any canopy
Visit our website to see all options available for the TrimLine Canopy: flourishdisplays.com
TRIMLINE CANOPY 10' x 15'
Assembly Instructions
set up is easiest with a little help!
10 foot Front

Advertisement

loading

Summary of Contents for Flourish TRIMLINE CANOPY 10' x 15'

  • Page 1 TRIMLINE CANOPY 10' x 15' Assembly Instructions Video instructions are available on our website! Go to: flourishdisplays.com/instructions or scan this code with your QR Code Reader App for a direct link to our instructions and videos. Please, assemble the TrimLine at home the first time, not at an event. 10 foot Front 15 foot Front Before beginning assembly of your TrimLine,...
  • Page 2: Frame Overview

    FRAME OVERVIEW Ridge Support Tee Joint 2 Way Ridge Support (Arrow must point DOWN) Rafter Base Corner Joint 4 Way Rafter Base StaBar 3 Way StaBar Ell StaBar Tee Foot Joining Pole Sections: *Before beginning assembly for Pole sections click together. Take care to join purple coded male the first time, take a moment to poles to purple coded females, and no-color code males to no- start thumbscrews on all joints...
  • Page 3 ASSEMBLY OF ROOF FRAME 1. Begin by clicking together male and female purple coded sections to form two 10 ft poles. 2. Slide Rafter Base Joints onto all purple coded poles (two 10 ft and two 5 ft), clicking onto the snap buttons located midway on each section.
  • Page 4 RAFTERS 1. To assemble rafters, slide each Rafter End (with metal sleeve) onto a Rafter Base Stub, keeping the metal end up. 2. Slide three of the Rafter Center sections through the holes in the Ridge Support Joints. The remaining Rafter Center sections will rest ON TOP of the ridgepole. 3.
  • Page 5 TOPPER *Your canopy top has been folded for shipping in a way that makes it easy to set up. Please read these directions before unfolding topper. 1. Beginning at one gable end of the roof frame, unroll top along the ridge pole, letting the ends hang down over either end of the frame.
  • Page 6 Setting Up and Using the Telescoping Legs Initial Set Up 1. Begin by holding leg upright, with the row of holes towards the bottom of the leg. Line up the snap button at the very bottom with the row of holes, then start pulling the inner nested section of the leg out, just about 6”...
  • Page 7: Attaching The Legs

    ATTACHING THE LEGS 1. Begin with the front edge of your canopy. Lift front edge and insert legs into corner joints. *This can be done by one person by using our EasyRiser Kit, or you can ask a neighbor for a moment of their time to help you raise the canopy.
  • Page 8 STABARS 1. Click together no color pole sections to form three 10 ft poles. You'll also use two 5 foot sections with snap buttons on either end. 2. Insert poles into StaBar Joints, working along the back of the frame first, then adding the sides. 3.
  • Page 9 PACKING UP You may choose to break your canopy down to it's smallest component parts if packing space is tight, but for ease of set up at your next show you may prefer to leave the hardware connected to the poles. Most compact storage Quicker set up Fastest set up...
  • Page 10 Care and Feeding of your TrimLine Canopy * Vinyl is a tough and durable fabric. It resists mildew and dirt but should receive your care and attention to keep it in prime condition. DO NOT STORE WET. If you have had to break down wet, remove canopy top and walls as soon as you get home and open up to allow it to dry thoroughly.