Advertisement
Quick Links
This page contains a list of all the parts you should receive for your TrimLine Canopy. Parts for optional
components are listed with separate instructions for those options. Please review all parts to be sure you
have everything you need. Should you find anything missing, please call us immediately at: 1-800-296-0049
(1) Topper (Roof)
(6) Sidewalls 10 ft wide x 7 ft high
Plastic Rafter Poles
(14) Rafter End sections - with metal connector on one end
(7) Rafter Center sections
Joints
(2) Corner Joints ATL4 L
Left Side Rafter Base
(2) Ridge Pole Supports
TLR
(2) StaBar 3-Ways
AT200
The TrimLine 10' x 20' Canopy
Parts List
(2) Corner Joints ATL4 R
Right Side Rafter Base
(1) 2-Way Ridge Support
TLR2
(2) StaBar Ells
AT202
Hardware
(4) Tie-down Screws
(8) 10" Steel Spikes
(14) Ball Bungees for bundling poles
(26) Thumbscrews (includes 1 spare)
(2) 4-Way Rafter Bases
ATL5
(3) Tee Joints
TL202
(1) StaBar Tee
AT210
Page 1
(8) Rafter Bases
ATT
(6) Feet
AT211
(over, please)
Advertisement
Related Manuals for Flourish TrimLine 10' x 20'
Summary of Contents for Flourish TrimLine 10' x 20'
- Page 1 The TrimLine 10' x 20' Canopy Parts List This page contains a list of all the parts you should receive for your TrimLine Canopy. Parts for optional components are listed with separate instructions for those options. Please review all parts to be sure you have everything you need.
- Page 2 (Parts List Continued) Metal Poles (4) Upper Horizontal female sections – 58 ¼” long, coded purple (4) Upper Horizontal male sections – 61” long, coded purple *Male and female sections click together to form (4) 116 ½” poles, coded purple (9) Horizontal female sections –...
-
Page 3: Instructions For Assembly
TrimLine. ***The TrimLine Canopy can be set up by one person, but as with any canopy set up is easiest with a little help! Visit our website to see all options available for the TrimLine Canopy: www.flourish.com... -
Page 4: Frame Overview
FRAME OVERVIEW Tee Joint Ridge Support 2 Way Ridge Support (Arrow must point DOWN) Corner Joint Rafter Base 4 Way Rafter Base StaBar Tee StaBar Ell StaBar 3 Way Foot Joining Pole Sections: *Before beginning assembly for Pole sections click together. Take care to join purple coded male the first time, take a moment to poles to purple coded females, and no-color code males to no- start thumbscrews on all joints... - Page 5 ASSEMBLY OF ROOF FRAME 1. Begin by clicking together the male and female purple coded sections to form four 10 ft poles. 2. Slide Rafter Base Joints onto the purple coded poles, clicking onto the snap buttons located midway on each section. Be sure all Rafter Base stubs are pointed the same direction. 3.
- Page 6 RAFTERS 1. To assemble rafters, slide each Rafter End (with metal sleeve) onto a Rafter Base Stub, keeping the metal end up. 2. Slide three of the Rafter Center sections through the Ridge Support Joints. The remaining Rafter Center sections will sit on top of the Ridge Pole. 3.
- Page 7 TOPPER *Your canopy top has been folded for shipping in a way that makes it easy to set up. Please read these directions before unfolding topper. 1. Beginning at one gable end of the roof frame, unroll top along the ridge poe, letting the ends hang down over either end of the frame.
- Page 8 Telescoping Legs Setting Up and Using the Initial Set Up 1. Begin by holding leg upright, with the row of holes towards the bottom of the leg. Line up the snap button at the very bottom with the row of holes, then start pulling the inner nested section of the leg out, just about 6”...
-
Page 9: Attaching The Legs
ATTACHING THE LEGS 1. Begin with the front (long edge) of your canopy. Lift the front edge and insert center leg into 4 Way Rafter Base. With this leg in place, you can walk to either end and attach the other two legs into the Corner Joints. - Page 10 STABARS 1. Click together no color pole sections to form four 10 ft poles. 2. Insert poles into StaBar Joints, working along the back first, then adding the sides. 3. Adjust StaBar Joints up or down along the legs to allow the StaBar to remain level even when the legs are set at differing heights to compensate for uneven terrain.
- Page 11 Packing Up You may choose to break your canopy down to it's smallest component parts if packing space is tight, but for ease of set up at your next show you may prefer to leave the hardware connected to the poles. Quicker set up Fastest set up Most compact storage...
- Page 12 Care and Feeding of your TrimLine Canopy * Vinyl is a tough and durable fabric. It resists mildew and dirt but should receive your care and attention to keep it in prime condition. DO NOT STORE WET. If you have had to break down wet, remove canopy top and walls as soon as you get home and open up to allow it to dry thoroughly.