Advertisement
Quick Links
OPERATION MANUAL OF TPMS SENSOR
Thank you for choosing our TPMS. This guide instructs the technician how to properly
mount and dismount a Baolong TPMS clamp-in sensor.
Introduction of TPM-D pro-N
TPM-D pro-N is the transmitting module in TPMS.Its working frequency is 433.92MHz;
7dBm≥transmitting power≥-60dBm.Supply: Battery. The communication mode between
TPM-D pro-N and receiving module is RF wireless communication.The module detects
pressure and temperature inner the tire periodically and send the information via RF output
circuit to the receiving module.One can manually detect data inner tire by LF wake-up tools.
Install it on the rim together with cycle valve.
1. Mounting of Transmitter
1.1 Identify Transmitter
Check whether the prepared sensor is the same with the image below.
Note: Only plastic or aluminum caps, aluminum valves and nickel plated valve cores can be
used when replaced.
①
Electronic Module
③
Valve Stem
1
MODEL: TPM-D pro-N
②
Self-lock Screw
⑦ Rubber band
Valve Stem
⑤
Valve Cap
Valve Stem
④
Nut
Valve
Stem
Advertisement
Related Manuals for Baolong TPM-D
Summary of Contents for Baolong TPM-D
- Page 1 Baolong TPMS clamp-in sensor. Introduction of TPM-D pro-N TPM-D pro-N is the transmitting module in TPMS.Its working frequency is 433.92MHz; 7dBm≥transmitting power≥-60dBm.Supply: Battery. The communication mode between TPM-D pro-N and receiving module is RF wireless communication.The module detects pressure and temperature inner the tire periodically and send the information via RF output circuit to the receiving module.One can manually detect data inner tire by LF wake-up tools.
- Page 2 1.2 Before the transmitter is installed, the rim around the hole must be cleaned with a cloth. ④ 1.3 Take off the nut , insert the valve stem through the Inside the tire Outside the tire rim hole from inside. ④...
- Page 3 1.8 Dynamically balance the wheel before it is placed back on the vehicle. 2. Dismounting of Transmitter 2.1 Deflate the tire and remove the wheel weights from the rim. Push the tire bead away from the rim. Make sure to always set the bead breaker at least 90 degrees from the valve stem to avoid damaging the electronic module.
- Page 4 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 5 Baolong, the former will supersede the latter. The warranty will be honored by any authorized Baolong dealer. The owner is required to provide date of proof of purchase. The authorized dealer will determine if there is a warranty condition associated with materials and/or manufacturing workmanship.