Troubleshooting; Error Display; Checking The Memory Version Of The Remote Control - OERTLI OETRONIC 4 Manual

4. Troubleshooting

4 Troubleshooting
4.1

Error display

4.2

Checking the memory version of the remote control

+
MODE
1 2 3 4 5
%
0 2 4 6 8 10 12 14 16 18
$
MODE
C002543-B
13
5"
A000857-A
6 7
20 22 24
If there is a malfunction, the remote control displays the message
Error.
The boiler control panel will indicate the corresponding error
message.
¼ To consult the cause of error messages, refer to the boiler's
installation and maintenance instructions (Chapter:
Troubleshooting).
Before contacting the installer, make a note of the memory version
installed in the remote control. Proceed as follows:
1. Press the MODE and r keys simultaneously for 5 seconds.
2. The 0 menu is displayed. Press the rotary button 3 times to display
the menu 3. The memory version is shown to the right of the
display.
To go back to the previous display, press the key r.
3. To return to the principal display, press the MODE key or wait 20
seconds.
RS400R - Package AD255
2009-07-31 - 300020545-001-A