Table of Contents
Advertisement
GETTING STARTED
The batteries included are for demo purposes only. Please replace
the low capacity Try Me batteries with new batteries for the best
performance. Slide the Demo/Off/On Switch to the ON position to
start.
NOTE:
Playing at close range for a prolonged period of time may cause
fatigue or discomfort. We recommend that children take a 15-minute
break for every hour of play.
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the unit, use a screwdriver to loosen
the screw and open the battery box.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance).
5. Replace the battery cover and tighten the screw to secure.
4
Advertisement
Table of Contents
