Safety & Operating Instructions - Salsco 810 Operator And Parts Manual

READ THOROUGHLY THE OPERATOR SAFETY INSTRUCTIONS ON THE FOLLOWING PAGES WHICH
ARE THE AMERICAN NATIONAL STANDARD OF POWERED SHREDDERS/GRINDERS SAFETY
SPECIFICATIONS, PROVIDED BY ANSI AND THE O.P.E.I.
THE FOLLOWING COUTIONS ARE PROVIDED BY SALSCO AS A QUICK REFERENCE ONLY AND ARE
NOT MEANT TO REPLACE THE PRECAUTIONS ON THE FOLLOWING PAGES.
1. ALWAYS use protective eyewear when machine is in operation.
2. ALWAYS use gloves and wear ear protection when machine is in operation.
3. NEVER put hands, legs or any part of your body into or near the chipper intake or discharge openings.
4. NEVER run machine with guards removed.
5. ALWAYS allow machine to cool off, remove key an put engine in neutral before attempting any
maintenance or repair.
6. BE SURE machine has stopped completely, engine is off, key is removed and spark plug is disconnected
before attempting any service or maintenance.
7. NEVER stand in front of chipper infeed hopper. It is possible for a chip or piece of wood to be thrown out.
8. BE SURE the machine is parked on a dry level surface before starting operation.
9. DO NOT operate with loose clothing or long unrestrained hair. BE SURE vines and branches are not
wrapped around your body parts.
10. DO NOT operate on ice or any other slippery surface. BE SURE area around machine is clear and clean.
You don't want to trip or fall into the machine.
11. NEVER leave machine running unattended, especially around youngsters or persons not instructed in the
safe operation of this machine.
12. READ and understand federal guidelines provided with this manual on the following pages.
O:\Manuals\810 CHIPPER\810 WOOD..BRUSH CHIPPER P.W. 10.30.2017.doc
CAUTIONS
- THINK -
- IT'S YOUR HAND OR FOOT -
- 6 -