2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL TABLE OF CONTENTS INTRODUCTION AND SPECIFICATIONS ..................1 INTRODUCTION ........................... 1 SPECIFICATIONS ........................1 BATTERY LIFE ..........................2 MATERIALS, WEIGHTS & DIMENSIONS ..................2 OPTIONS AND ACCESSORIES ......................3 OPTIONS ............................4 ACCESSORIES ..........................
Page 4
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL DRAWINGS ............................34 PARTS IDENTIFIER, MODEL 2830A-08, WEATHER RESISTANT AC POWER MODULE & INHALATION NOISE REDUCTION (INR) OPTION ..............35 PARTS IDENTIFIER, MODEL 2830A-09, WEATHER RESISTANT AC POWER MODULE, MS CONNECTORS & INHALATION NOISE REDUCTION (INR) OPTION ........36 PARTS IDENTIFIER, MODEL 2830A-10, WEATHER RESISTANT AC POWER MODULE, INHALATION NOISE REDUCTION (INR) &...
Our engineering team has integrated the latest in digital advancements to produce the industry’s most intelligible and reliable diver communicators. Our built in quality that Amron is known for makes the 2830A series the most versatile and durable communicators anywhere in the world! The AMCOM III Series is a family of full-featured hard-wired, three-diver communicators with independent microphone and earphone volume controls for the tender and each diver.
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL BATTERY LIFE Model 2830A-08 ......................32 Hours Model 2830A-09 ......................32 Hours Model 2830A-10 ......................22 Hours Model 2830A-11 ......................41 Hours Model 2830A-12 ......................29 Hours Model 2830A-13 ......................30 Hours Model 2830A-15 ......................
OPTIONS AND ACCESSORIES The following configurations are available to customize your AMCOM III communicator. Options have to be ordered at the time of purchase or the communicator has to be returned to AMRON for the option to be installed. Model 2830A-08 with Inhalation Noise Reduction Option Available Models &...
OPTIONS -08 INHALATION NOISE REDUCTION (INR) The communicator has all the features of the -11 plus Amron’s Inhalation Noise reduction allowing the user to reduce or completely remove each individual diver’s inhalation noise for improved communications. This option requires the divers to be wired in Full Duplex (4-Wire) mode.
Full Duplex (4-Wire) mode. -17 MS CONNECTORS & HELIUM SPEECH UNSCRAMBLER (HSU) The communicator has all the features of the -15 plus Amron’s DSP3 Helium Speech Unscrambler (HSU) using the state-of-the-art Digital Signal Processor (DSP) technology to correct raw helium speech into clear, intelligible voice. This option includes a complex noise reduction filter to improve communications in situations with high background noise levels.
Page 10
Amron’s Active Noise Reduction Headset features two key technologies, unmatched active noise reduction and unique dynamic noise cancelling microphone. The proprietary electronic circuitry design shapes and equalizes incoming audio signals to provide a clean full sound quality that enhances intelligibility of the intercom audio.
Custom cable lengths are available upon request. 2.2.11 Item No. 190-0650-01 AMRON WIRELESS TENDER HEADSET (Single Ear Muff) A single ear muff headset that is compatible with the 28B Wireless Tender option. Additional headsets can be ordered to allow other crew members, supervisors, crane operators, etc.
Page 12
To prevent this, the PANEL SPEAKER can be turned off using the SPEAKER SWITCH. Another option is to move the tender away from the communicator by using the Amron Model 2822-28 Walk-and-Talk Module accessory. This allows the tender to communicate while other members of the surface crew listen using the PANEL SPEAKER.
Page 13
If the tender requires more mobility at the dive site, the Amron Model 2821-28 Remote Push-to-Talk Module can be used to extend the headset cable. It includes a push-to-talk button on a clip- on belt module and comes standard with 25 feet (7.6 meters) of cable (custom...
SPEAKER unless the PUSH-TO-TALK BUTTON or PUSH-TO-TALK JACK is used. When a pre-amp microphone is used in the 2-Wire mode setup, it is required to have special speakers supplied only by Amron. Contact Amron for more information. To connect the diver in Full Duplex (4-Wire) mode, connect the diver microphone to this jack and the diver earphone the DIVER EARPHONE jack as shown in the 4- Wire diagram in section 3.7.
Page 15
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL 3.2.5 DIVER EARPHONE CONNECTION (BLACK) – is a dual 5-way binding post jack (color-coded black) that functions as the output for the diver's earphone. It is only used when the diver is in Full Duplex (4-Wire) mode. 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL HELIUM SPEECH UNSCRAMBLER (DSP3) CONTROLS The controls for the DSP3 Helium Speech Unscrambler (HSU) are located in the options panel on the right side of the front panel as shown below. 3.3.1 ON/OFF SWITCH –...
PORTABLE COMMUNICATOR USER MANUAL INHALATION NOISE REDUCTION CONTROLS Amron’s INR module features an individual inhalation noise reduction circuit for each diver that can eliminate inhalation noise completely or suppress the inhalation noise to the degree the operator demands. The net result is improved communications and intelligibility between the tender and divers.
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL WIRELESS TENDER (28B) CONTROLS 3.5.1 BASE STATION ON/OFF/VOLUME – control is located on the bottom right side of the Base Station. It turns on and off the power to the Wireless Tender Base Station and adjusts the volume level by rotating the knob in either direction.
Amron cannot guarantee that non-Amron power supplies meet the same high standards and strongly advises against using any such device to power your diver communicator.
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL BATTERY CONDITION 4.2.1 POWER ON – BATTERY CHECK Turn power switch “ON” and observe the LED battery condition indicator. The battery indicator will display the condition of the battery. • “STEADY GREEN” light indicates the battery has sufficient voltage to operate the unit.
Page 25
1/2-inch (12 mm) away. If using the Amron Remote Walk-and-Talk, Model 2821-28, the tender may press the Push-To-Talk Switch on the belt module to speak to the divers.
Acoustic feedback can also be avoided by moving the tender away from the communicator by using the Amron Model 2822-28 Remote Walk-and-Talk Module with 25-foot-long cable or the 28B Wireless Tender Option.
Amron’s advanced NOISE REDUCTION FILTER (NRF) incorporates a complex DSP algorithm which filters out background noise while allowing the diver’s speech to be clear and intelligible. Amron NRF automatically captures the frequency spectrum of applied background noise within the audio frequency bandwidth and reduces it without affecting the diver’s speech.
4.8.2 The Inhalation Noise Reduction feature has been fully integrated with both Amron’s portable and rack mount communicators. The built in INR module can recognize the inhalation noise through the use of high frequency content characteristics of inhalation noise.
ACTIVE NOISE REDUCTION (ANR) OPERATION 4.9.1 Not all noise cancellation headsets are the same. Amron’s new series of Active Noise Reduction (ANR) headsets isolates and reduces topside noise in very loud environments dramatically, allowing the tender and divers to communicate more clearly and comfortably with increased intelligibility.
WIRELESS TENDER (28B) OPERATION 4.10.1 Amron’s full duplex 28B Wireless Tender has the capabilities to operate in two separate channels (1 & 2) with up to three (3) topside remote users per channel, totaling a maximum of six (6) remote topside users. By pressing the conference button located on the base station, all remote topside users from both channels (1 &...
4.12.1 All “Remote” headsets to be fully charged and in the “OFF” position. 4.12.2 Remove base-station from the Amron Communicator lid. Channel selection buttons “#1” and “#2” are located on the rear side of base-station. 4.12.3 Turn Amron Communicator power “ON”.
4. Identify the microphone and headset leads. When using an Amron headset, the microphone is the red banana plug and the headset is the black banana plug.
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL 4. Identify the microphone and headset leads. When using an Amron headset, the microphone is the red banana plug and the headset is the black banana plug. 5. Plug the microphone lead into the TENDER HEADSET (black) jack and the headset lead into the DIVER MICROPHONE (red) jack.
Page 34
5.4.4 YEARLY CHECK For maximum service life, it is recommended that the diver communicator be sent back to Amron for a yearly check. 5.4.5 LONG TERM STORAGE If the diver communicator is to be stored for a period greater than 30 days, it is recommended that it be stored in a cool dry location.
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL TROUBLESHOOTING Most problems are usually simple issues that can often be found by careful inspection of the diver communicator, diving umbilical, and diver wiring. The following section will describe the troubleshooting procedure for several common issues. If these sections do not cover your particular issue, it is recommended that the diving umbilical be disconnected from the diver communicator and follow the check-out procedures in sections 5.1 or 5.2.
Page 36
INDICATOR and test the battery if necessary. If the problem persists, disconnect the diver umbilical and perform the communicator check out procedure per section 5.1 or 5.2. If the communicator fails the check-out procedure, contact Amron for further assistance. If the communicator checks out, then the problem is likely in either the diver umbilical communication cable, the wiring of the diving hat/helmet, or the diver's microphone/earphone.
Page 37
If this does not solve the problem and the umbilical cannot be immediately replaced, then operate in 2-Wire mode until a replacement umbilical can be used. Amron strongly recommends the use of the Amron CC1 communication cable. It has been specially designed for clear communications and long service life.
Open the front panel and inspect. If that does not resolve the problem then contact Amron for further assistance. DRAWINGS The reference numbers shown on the parts identifier drawings correspond to the parts lists listed in the parts lists section.
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL 6.1 PARTS IDENTIFIER, MODEL 2830A-08, WEATHER RESISTANT AC POWER MODULE & INHALATION NOISE REDUCTION (INR) OPTION 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL 6.2 PARTS IDENTIFIER, MODEL 2830A-09, WEATHER RESISTANT AC POWER MODULE, MS CONNECTORS & INHALATION NOISE REDUCTION (INR) OPTION 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL 6.3 PARTS IDENTIFIER, MODEL 2830A-10, WEATHER RESISTANT AC POWER MODULE, INHALATION NOISE REDUCTION (INR) & 28B WIRELESS TENDER OPTION 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL 6.4 PARTS IDENTIFIER, MODEL 2830A-11, WEATHER RESISTANT AC POWER MODULE 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PARTS IDENTIFIER, MODEL 2830A-12, WEATHER RESISTANT AC POWER MODULE & DSP3 HELIUM SPEECH UNSCRAMBLER 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PARTS IDENTIFIER, 2830A-13, WEATHER RESISTANT AC POWER MODULE & 28B WIRELESS 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PARTS IDENTIFIER, MODEL 2830A-15, WEATHER RESISTANT AC POWER MODULE & MS CONNECTORS 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PARTS IDENTIFIER, 2830A-16, WEATHER RESISTANT AC POWER MODULE, MS CONN & 28B WIRELESS TENDER 283XA-UM REV 7.0...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PARTS IDENTIFIER, MODEL 2830A-17, WEATHER RESISTANT AC POWER MODULE, MS CONNECTORS & DSP3 HELIUM UNSCRAMBLER 283XA-UM REV 7.0...
The parts lists in this manual are for the current model of diver communicator as of the printing date. To Order Replacement Parts Contact: Amron International, Inc. 1380 Aspen Way, Vista, California, 92081 U.S.A. Telephone: (760) 208-6500 Fax: (760) 599-3857 Email: sales@amronintl.com...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PARTS LIST, MODEL 2830A-13, WEATHER RESISTANT AC POWER MODULE & 28B WIRELESS TENDER OPTION PART NO. DESCRIPTION 570-1008-30 3 DIVER AUDIO AMPLIFIER CARD 570-1012-00 WIRELESS CONTROLLER CARD ASSY (28B) 2820-302 CASE ASSEMBLY WITH POWER MODULE 2830A-400 FRONT PANEL ASSEMBLY 2824-502...
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PART NO. DESCRIPTION 190-0650-03 BASE STATION, 8 PORT CHARGER, SPARE BATTERY 283XA-UM USER MANUAL, 2830A PORTABLE COMMUNICATORS 7.10 PARTS LIST, MODEL 2830A-17, WEATHER RESISTANT AC POWER MODULE, MS CONNECTORS & DSP3 HELIUM UNSCRAMBLER OPTION PART NO.
Page 53
2830A-XX SERIES THREE DIVER PORTABLE COMMUNICATOR USER MANUAL PART NO. DESCRIPTION QTY. 14002B 5-WAY BINDING POST (BLACK) 14002R 5-WAY BINDING POST (RED) FUSE 3.15A/250V MICRO QUICK 0034.6019 (FOR 570-1008-XX AMPLIFIER CARD) LEDHOLDER-BLK.25 MOUNTING CLIP FOR 5MM LED LT2462-24-D51 LED; BI-COLOR RED/GREEN LEDGREEN LED GREEN BRITE FUSE;...
Amron’s literature covering this product. Oxygen Treatment Hoods and accessories are excluded and limited to 90 days. Amron’s obligation under this warranty is limited to the repair of or replacement, at Amron’s option, of defective material. This warranty shall not cover defects which are the result of misuse, negligence, accident, repair or alterations.
Need help?
Do you have a question about the AMCOM III 2830A Series and is the answer not in the manual?
Questions and answers