Getting Started - Jensen CMM720 Installation & Owner's Manual

CMM720 INSTALLATION
Preparation
Please read and understand entire manual before
installation.
installation assistance.
Before You Start
• Disconnect negative battery terminal.
• Avoid installing the unit where it would be subject to high
temperatures, such as from direct sunlight, or where it would be

Getting Started

• Unpack unit from its protective packaging.
• Connect vehicle wiring harness and antenna to this receivers
you are unsure.
harness adapter (sold separately).
• Reconnect battery negative terminal.
• Test for correct operation and secure back into dashboard.
• Snap trim ring into place if needed.
4 4
Typical ISO-DIN Installation
Unit
Trim Ring