Table of Contents
Advertisement
FEATURES & OPERATIONS
Toyota Supra Command
The Toyota Supra Command combines the functions of many switches. These
functions can be operated via the Controller and, depending on the equipment
version, the touchscreen.
1
2
THE CONTROL DISPLAY ON/OFF
Automatic
The Control Display is switched on automatically after unlocking.
In certain situations, the Control Display is switched off automatically, for instance if
no operation is performed on the vehicle for several minutes.
Manual
The Control Display can also be switched off manually.
1) Press the
button.
2) "Turn off control display"
Press the Controller or any button on the Controller to switch it back on again.
CONTROLLER OPERATION
With Navigation system
(1)
(2)
Without Navigation system
(1)
(2)
(1) Turn to switch between menu items
(2) Press to select a menu item
(3) Tilt in four directions to switch between displays
1 Control Display with touchscreen
depending on the equipment version
2 Controller with buttons and
depending on the equipment
version, with touchpad
(3)
(3)
10
BUTTONS ON THE CONTROLLER
Press once: call up main menu. Press twice: display all menu items of the
main menu.
Open the Communication menu.
Open the Media/Radio menu.
Open destination input menu for navigation (if equipped).
Open navigation map (if equipped).
Press once: open the previous display. Press and hold: open the menus
used last.
Open the Options menu.
Refer to the Owner's Manual for limitations and more details.
Parking sensors
(if equipped)
TURNING THE SYSTEM ON/OFF
Automatic
The system switches on automatically in the following situations:
• If selector lever position R is engaged when the engine is running, and;
• Depending on the equipment version: If the speed is slower than approx. 2.5
mph/4 km/h while approaching detected obstacles. (The activation distance
depends on the situation in question.)
The system switches off when a certain driving distance or speed is exceeded.
Switch the system back on, if needed.
Manual
Press the
button. (ON: the LED lights up, OFF: the LED goes out)
The rearview camera image is displayed if the reverse gear is engaged when
pressing the park assistance button.
Parking assistance button
11
Advertisement
Table of Contents
