Table of Contents
Advertisement
OVERVIEW
Keyless entry
Unlocking
Locking
Unlocking trunk lid
Panic mode
UNLOCKING OPERATION
Push
ONCE: Driver door
TWICE: All doors
* Driver door unlocking function can be programmed to unlock driver door only, or
all doors.
LOCKING OPERATION
Push
UNLOCKING THE TRUNK LID
Push and hold
PANIC BUTTON
Push and hold at least 3 seconds
or
Briefly press the button on the remote
control three times in succession.
Refer to the Owner's Manual for more details.
Driver door unlock*
Grasp the handle
Carry Smart
Key remote
Driver's door
Touch
Carry Smart
Key remote
6
Smart Key system
DRIVE-READY STATE
NOTE: The Smart Key must be carried to enable the start function. With the
selector lever in Park and the brake pedal depressed, push the "START STOP
ENGINE" switch.
CHANGE THE STATES
Without depressing the brake pedal, pressing the "START STOP ENGINE" switch
will change the state in succession from:
Drive-ready state
On - All electrical components can be used.
Stationary – Some electrical components can be used.
Standby state
Off - All systems OFF.
Idle state
Standby State
When standby state is switched on, most functions can be used while the vehicle is
stationary. Desired settings can be adjusted.
The vehicle is in the standby state after the front doors are opened from the outside.
OFF is displayed in the instrument cluster. The drivetrain is switched off
and standby state switched on.
7
Advertisement
Table of Contents
