Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CULLMANN CUlight FR 36F
Summary of Contents for CULLMANN CUlight FR 36F
- Page 1 FR 36F for Fujifilm...
-
Page 2: Foreword
Always keep this product dry. Do not use in rain or in damp conditions. This CUlight FR 36F camera flash applies to Fujifilm series camer- as and is compatible with TTL autoflash. With this TTL compatible This product contains high-voltage electronic parts. Touching flash, your shooting will become simpler. -
Page 3: Table Of Contents
LCD Panel ........33 What’s in the Box of CUlight FR 36F? ....34 Separately Sold Accessories . -
Page 4: Name Of Parts
Name of Parts • LCD Panel (1) TTL Autoflash Zoom: zoom display (Page 46) Focus length (Page 46) TTL: TTL autoflash : High-speed Flash exposure sync (Page 36) compensation amount (2) M Manual Flash M: Manual flash Manual flash output •... -
Page 5: What's In The Box Of Culight Fr 36F
• What’s in the Box of CUlight FR 36F? Power Management 1. Flash unit 2. Mini stand 3. Protection case 4. Diffuser 5. In- Power Switch to power the flash unit on (Long press the struction manual button for one second) or off. Turn off if it will not be used for an •... -
Page 6: Fec: Flash Exposure Compensation
FEC: Flash Exposure Compensation Choose Sync cord jack/S1/S2 triggering method to achieve high- speed sync flash. With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where minor adjusting of the TTL • ... - Page 7 Flash Output Range Set the flash frequency and flash times. The following table makes it easier to see how the stop changes • Press the SET Button to in terms of f/stop when you increase or decrease the flash output. select the flash frequency.
-
Page 8: Wireless Flash Shooting: Radio (2.4G) Transmission
As a master unit, CUlight FR 36F can control the following slave Multi mode. unit models: CUlight FR 60F As a slave unit, CUlight FR 36F can be controlled by the follow- 3. Setting the Communication Channel ing master unit models: CUlight FR 60F, CUlight RT 500F If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. -
Page 9: M: Wireless Flash Shooting With Manual Flash
6. Multi: Wireless Flash Shooting Check the communication channel with Manual Flash • If the master unit and slave unit(s) are set to a different Setting < Multi > strobo- channel, set them to the scopic flash. same channel. (Page 41) •... -
Page 10: Other Applications
• Note: When attaching to the camera, the auto focus as- out at the same time. sist beam of CUlight FR 36F can only be lighted by set- ting its focus mode (M/C/S) to S mode. The other two Push the wide panel modes cannot light up its auto focus assist beam. -
Page 11: Zoom: Setting The Flash Coverage And Using The Wide Panel
C.Fn: Setting Custom Functions • Point the flash head straight ahead and then upward by 90°. The catchlight will not appear if you swing the flash The following table lists the available and unavailable custom head left or right. functions of this flash. • ... -
Page 12: Firmware Upgrade
Technical Data Number of flashes that will activate over-temperature pro- tection: Power Output Level Number of Flashes Model CUlight FR 36F • Type Compatible Cameras Fujifilm cameras (Please reference to 1/2 +0.7 compatible camera models) 1/2 +0.3 Guide No. (1/1 output @ 105mm) -
Page 13: Troubleshooting
With high-speed sync, the effective flash range will be short- er. Make sure the subject is within the effective flash range CULLMANN GERMANY GmbH herewith declares, that this de- displayed. vice is in compliance with the basic requirements and all other ap- plicable regulations of the directive 1999/5/EC.
Need help?
Do you have a question about the CUlight FR 36F and is the answer not in the manual?
Questions and answers