Foreword Thank you for purchasing this product. This CUlight FR 60MFT camera flash applies to Olympus/Panas- onic series cameras and is compatible with TTL autoflash. With this TTL compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments.
For Your Safety Always keep this product dry. Do not use in rain or in damp conditions. This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may result in electric shock. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
CUlight TTL Camera Flash Conventions used in this Manual • This manual is based on the assumption that both the camera and camera flash’s power switches are powered on. • Reference page numbers are indicated by “p.**”. • The following alert symbols are used in this manual: The Caution symbol gives supplemental information.
Name of Parts • Body 08. Lock Ring 01. Catchlight Panel 09. Battery Compartment 02. Built-in Wide Panel 10. USB Port 03. Flash Head 11. Slave Flash Ready Indicator 04. Optic Control Sensor 12. External Power Supply 05. Sync Cord Jack Socket 06.
• Slave Unit : Slave Slave icon • What’s in the Box of CUlight FR 60MFT? 1. Flash unit 2. Mini stand 3. Protection case 4. Instruction manual • Separately Sold Accessories The product can be used in combination with the following separately sold accessories: 1.
Attaching to a Camera Attaching to a Camera Attach the Camera Flash. Attach the Camera Flash. • Slip the camera flash’s ● Slip the camera flash’s mounting foot into the camera’s hotshoe all the mounting foot into the way. camera’s hotshoe all the way.
Flash Mode: TTL Autoflash Flash Mode: TTL Autoflash This flash has three flash modes: TTL, Manual (M), and Multi This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode, the camera and the flash will work (Stroboscopic).
High-Speed Sync High Speed Sync (FP flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. Setting the flash to High-speed Sync mode when it is on the camera: Press the <SYNC>...
Flash Mode – M: Manual Flash M: Manual Flash The flash output is adjustable from 1/1 full power to 1/128th The flash output is adjustable from 1/1 full power to 1/128th power power in 1/3rd stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required in 1/3rd stop increments.
Flash Mode -- Multi:Stroboscopic Flash Flash Mode – Multi:Stroboscopic Flash With stroboscopic flash, a rapid series of flashes is fired. It can be With stroboscopic flash, a rapid series of flashes is fired. It can used to capture a multiple images of a moving subject in a single be used to capture a multiple images of a moving subject in a photograph.
• This ash can work in TTL/M/Multi/OFF ash modes when set as a master unit. As a slave unit, CUlight FR 60MFT is compatible with the Culight FR 36MFT ash unit or with CUlight RT 500MFT transmitter. • Even with multiple slave units, the master unit can control all of them via wireless.
Page 15
4. TTL: Fully Automatic Wireless Flash Shooting Auto ash Shooting with One Slave Unit Master Unit Setting • Attach a CUlight FR 60MFT camera ash on the camera and set it as the master unit. (Page 42) • M/A/B/C can be set as TTL...
Page 16
Slave Unit Setting flash as the wireless slave ● Set the other camera unit. . (Page 42) ● The slave unit can be set flash as the wireless slave Slave Unit Setting Slave Unit Setting as A/B/C. unit. . (Page 42) • ...
Page 17
Using Fully Automatic Wireless Flash The FEC and other settings that set on the master unit will also be appeared on the slave unit automatically. The slave unit does not Using Fully Automatic Wireless Flash need any operation. Use the following settings to make wireless The FEC and other settings that set on the master unit will also Using Fully Automatic Wireless Flash flashes according to the same methods with normal flash shooting.
Page 18
Positioning and Operation Range (Example of wireless flash Positioning and Operation Range (Example of wireless flash Positioning and Operation Range (Example of wireless shooting) shooting) flash shooting) ● Autoflash Shooting with One Slave Unit ● Autoflash Shooting with One Slave Unit • ...
Other Applications Sync Triggering The Sync Cord Jack is a 3.5mm plug. Insert a trigger plug here and the flash will be fired synchronously with the camera shutter.
Bounce Flash By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. This is called bounce flash. To set the bounce direction, hold the flash head and turn it to a satisfying angle.
ZOOM: Setting the Flash Coverage and Using the Wide Panel The flash coverage can be set automatically or manually. It can be set to match the lens focal length from 10 mm to 100mm (4/3 system). Also, with the built-in wide panel, the flash coverage can be expanded for 7mm wide-angle lenses.
C.Fn: Setting Custom Functions The following table lists the available and unavailable custom functions of this flash. C.Fn Custom Functions Custom Function Setting No. Settings & Function Signs Description m/ft Distance indicator feet Auto power off ZOOM ZOOM Anzeige- 3/4 system format 135 system Sv APOT...
Protection Function Protection Function 1. Over-Temperature Protection • To avoid overheating and deteriorating the flash head, do not fire more than 30 continuous flashes in fast succession at 1/1 full power. After 30 continuous flashes, allow a rest time of at least 10 minutes.
Technical Data Model CUlight FR 60MFT • Type Compatible Cameras Olympus/Panasonic cameras (refer to compatible camera models) Guide No. (1/1 output @ 60 (m ISO 100) 200mm) 190 (feet ISO 100) Flash Coverage 20 to 200mm (135 system) or 14 to 133mm (APS) • ...
Troubleshooting If there is a problem, refer to this Troubleshooting Guide. The Camera Flash cannot be charged. • The battery is installed in the wrong direction. I nstall the battery in the correct direction. • The camera flash’s internal battery is exhausted. ...
Compatible Camera Models This flash unit can be used on the following camera models: Olympus: E-M10II, E-M5II, E-M1, E-PL8, E-PL7, E-PL6,E-PL5, E-P5, E-P3, PEN-F Panasonic: DMC-GX85, DMC-G7, DMC-GF1, DMC-LX100, DMC-G85, DMC-GH4, DMC-FZ2500GK This table only lists the tested camera models, not all Olympus/ Panasonic cameras.
Declaration of Conformity Hereby, CULLMANN GERMANY GmbH declares that the radio equipment type CUlight FR 60MFT is in compliance with Directi- ve 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.cullmann.de...
Need help?
Do you have a question about the Culight FR 60MFT and is the answer not in the manual?
Questions and answers