Table of Contents
Advertisement
TECHNICAL REFERENCE
Selecting 300 dpi or 600 dpi
Set the printer to 300 dpi if the designated output is not obtained when
printing using a DOS application compatible with the 300 dpi PCL printer.
Press
1
pears.
Press
2
User Param." appears. The messages
change in the following order.
1 Tray Pap. Size
3 User Param.
Press
3
move the flashing block cursor until it
appears in the position shown in the
illustration to the right .
Note
The bits other than the one highlighted in the
illustration are unrelated to this setting.
Press
4
0, as desired.
Display
02:0010 0000
02:0010 1000
56
. "Prt Help List" ap-
or
2 Language
and press
to change the setting to 1 or
Heater status
600 dpi (default setting)
300 dpi
Prt Help List
until "3
3 User param.
to
02:0010
O K
000
Advertisement
Table of Contents
