Table of Contents
Advertisement
L12 – User manual – English (EU/USA) – 15/01/2020 - ISSUE 4
6
Pre-start checks
THESE CHECKS MUST BE COMPLETED BEFORE EACH
START OF THE L12. ANY FAULTS MUST BE RECTIFIED
BEFORE THE L12 IS SWITCHED ON.
✓ The L12 is in good condition and securely attached to
the transport vehicle
✓ The L12 water tank is securely attached to the
transport vehicle
✓ Water tank is full of clean water
✓ Water filter is clean and free from debris
✓ Air intakes (boiler and engine) are clear of debris
✓ The lance, hose reel and hose are securely connected
and free from damage
✓ Lance wear strips are not excessively worn
✓ The water inlet, return hose and water level sensor
are connected
✓ Pipe/hose routes are clear of sharp edges and hot
surfaces
✓ There are no signs of leaks from any pipe or
connection
✓ Petrol/gasoline tank is full of clean petrol/gasoline fuel
✓ Diesel tank is full of clean diesel fuel
✓ Diesel filter is clean and free from debris
✓ The Foamstream® concentrate has not been subject
to temperatures below 5°C/41°F and frozen or
separated
✓ Foamstream® concentrate can is in place and
connected
✓ Foamstream® filter is clean and free from debris
✓ Engine engine oil level is correct
✓ Pump oil level is correct
✓ Engine and boiler exhaust are secure and clear of
debris and obstruction
✓ Water feed valve is connected and in the ON (inline)
position
✓ Air has been bled from water system
DO NOT PUT PETROL/GASOLINE INTO THE DIESEL
TANK
13
Advertisement
Table of Contents
