Signature Hardware Double Neo-Angle Shower Curtain Rod Installation Instructions

DOUBLE NEO-ANGLE SHOWER CURTAIN ROD
BEFORE INSTALLING
Read entire shower rod installation Instructions.
Observe all local building and safety codes. For
the following installation instructions it is
assumed that any old fixtures have been
removed and any repairs to the wall have
been completed.
INSTRUCTIONS
Unpack and inspect the product for any
shipping damages. If you find damages, do not
install. Contact Customer Service at
1.866.855.2284. If you need assistance or have
questions while installing your shower rod
contact Customer Service.
We recommend consulting a professional if
you are unfamiliar with installing bathroom
fixtures. Signature Hardware accepts no liability
for any damage to the walls or ceiling, or for
personal injury during installation.
TOOLS AND MATERIALS:
Level
Drill
Screwdriver
Pencil
Hacksaw
Tape Measure
Hammer
¼" Drill Bit
INSTALLATION
1. Lay the rod sections on the floor. Assemble the rod with the
connector piece.
2. Verify that the rod sections are the proper length for your
installation. If not, trim with a hacksaw.
3. Hold the wall brackets up at the desired mounting height.
Double Neo-Angle Curtain Rod Installation Instructions
Measure and trim.
1