Download Print this page

Signature Hardware Glenwood 906537 Installation Instructions

Deck mount tub faucet

Advertisement

Quick Links

GLENWOOD DECK MOUNT TUB FAUCET
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing fixtures. Signature
Hardware accepts no liability for any damage to the
faucet, plumbing, bathtub, floor, or for personal injury
during installation.
Observe all local plumbing and building codes.
Unpack and inspect the faucet for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
GETTING STARTED
Ensure that you have gathered all the required
materials that are needed for the installation.
For these instructions, it is assumed that the old
faucet has been completely removed and any
necessary repairs or modifications to the water
supply have been completed.
TOOLS AND MATERIALS:
Plumbers
Tape
Adjustable
Wrench
Glenwood Deck Mount Tub Faucet Installation Instructions
SKU(s): 906537
Thread
Phillips
Sealant
Screwdriver
Basin Wrench
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Glenwood 906537 and is the answer not in the manual?

Questions and answers

Summary of Contents for Signature Hardware Glenwood 906537

  • Page 1 SKU(s): 906537 GLENWOOD DECK MOUNT TUB FAUCET TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, bathtub, floor, or for personal injury Plumbers Thread Phillips...
  • Page 2 GLENWOOD DECK MOUNT TUB FAUCET INSTALLATION 1. Remove the lock nuts from each of the deck mount 3. From below, finish tightening the lock nuts to secure couplers. Insert each coupler into its prepared mount- the faucet to the tub. Use an adjustable wrench or ing hole and tighten the lock nuts from underneath basin wrench to tighten firmly.
  • Page 3 GLENWOOD DECK MOUNT TUB FAUCET 5. Use the flexible hose to connect the hand shower 7. Once installation is complete, turn the faucet on to the outlet located on the hand shower cradle, as for appoximately 60 seconds to check for any leaks. shown.