Table of Contents
Advertisement
Using a Password
You can use a password to keep the infor-
mation in the databank private. The pass-
word is requested when the unit is turned on
and the databank is accessed.
Password Warnings
Warning! After you set the password, you
must enter the password to access the data-
bank for the first time during a session.
Always record your password and keep it in
a separate place.
If you forget the password, you must reset
the unit to access the databank. For instruc-
tions, see "Resetting Your Product".
Warning! Resetting the unit erases all user-
entered information. Always keep written
copies of your data.
If the unit does not reset after pressing the
reset button, remove the batteries, wait at
least two minutes, and then re-install them.
For battery instructions, see "Replacing the
Battery".
Advertisement
Table of Contents
