Installing Batteries And Cards - Franklin BOOKMAN DMQ-440 User Manual

Installing Batteries
BOOKMAN 440 models use two
CR2032 3-volt batteries. Here is how
to install or replace the batteries.
Warning: When the batteries lose
power or are removed from your
BOOKMAN, information that you en-
tered in its built-in book, and in an in-
stalled book card, will be erased.
1. Turn your BOOKMAN over.
2. Slide off its battery cover in
the direction of the triangle.
3. Install the batteries with
their plus signs facing you.
4. Replace the battery cover.
Resuming Where You Left Off
You can turn off your BOOKMAN
at any screen. When you turn
your BOOKMAN on again, the
screen that you last viewed
appears.
Installing Cards
Warning: Never install or remove a
book card when your BOOKMAN is
on. If you do, information that you en-
tered in its built-in book, and in an in-
stalled book card, will be erased.
1. Turn your BOOKMAN off.
2. Turn your BOOKMAN over.
3. Align the tabs on the book
card with the notches in the
slot.
4. Press the card down until it
snaps into place.
Removing Cards
Warning: When you remove a
card to install another, information
that you entered into the removed
card will be erased.
4