Temporary Storage; Problem & Solution; Required Information - Modena SC Series Manual

4. TEMPORARY STORAGE

-
Place a buffer, a piece of wood, or other materials in between the door and the main unit to prevent the
unit door closed.
-
Make sure not to store the unused cooler at a location where children play. Should a child enter the
compartment and the door is closed, the child may not be able to open the door from the inside.
Check the following before contacting our Service Center in the event of dysfunction. If the problem
continues after taking the proper remedial action, disconnect the power cord plug from the wall outlet.
Transfer the items stored in the cooler to a box or other container . Then contact the dealer from whom you
purchased this unit or our Service Center,and be ready to provide information as listed in "REQUIRED
INFORMATION" below.
CAUTION: To prevent any electrical shocl hazards, do not disconnect the
from the wall outlet with wet hands.
Unit is not working
Unit is not cold
Food is Frozen
Noise
Condensation on the
outer surface of the
freezer:

REQUIRED INFORMATION

1. Nature of malfunction (as accurately as possible).
2. Number / type of product.
3. Serial number.
4. Customer's name, address, phone number.
5. Year and date of purchase.
6. Desired date for service visit.
Part 7 :
Problem & Solution
-
Is the power cord unplugged?
-
Is there a problem with the power source / fusebox?
-
Is the circuit breaker activated?
-
Is the temperature properly regulated?
-
Is the air circulation inside the unit obstructed?
-
Is there too much food being stored inside the unit?
-
Is the unit door opened too frequently?
-
Is the condenser obstructed?
-
Is the unit installed in a hot environment?
-
Is the thermostat set to very cold?
-
Is the food / drink stored near the air outlet?
-
Is the freezer put on even surface?
-
Is the back of the freezer against the wall?
-
Is the cooler put against other objects?
-
Dew may form on the outer surface of the freezer when the ambient air is
too hot / humid. Condensation occurs during high humidity and when the
water particles in the air come into contact with cold surface. This is
perfectly normal. Simply wipe the surface using dry cloth.
power cord plug
English
19