Part 1 : Name Of Parts; Part 2 : Installation - Modena UC Series Manual

Part 1:
Name of Parts
* The image is a general overview and is not necessarily the same as the product you receive.
* Features and completeness depends on the type of products
Part 2:
Installation
Important safety instructions
1. To obtain full use of the cabinet, we recommend reading this instruction manual.
2. It is the user‟s responsibility to operate the appliance in accordance with the instructions given.
3. Contact Modena service center immediately in case of any malfunctions.
4. Place the cabinet in a dry and ventilated place.
5. Keep the cabinet away from strongly heat-emitting sources and do not expose it to direct sunlight.
6. Always keep in mind that all electrical devices are sources of potential danger.
7. Do not store inflammable material such as thinner, gasoline etc. in the cabinet.
8. We declare that no asbestos nor any CFC are used in the construction.
9. The oil in the compressor does not contain PCB.
Unpacking and installation
Remove the wooden pallet and the packing. External surfaces are supplied with a protection foil,
which must be removed before installation.
To ensure correct function it is important that the cabinet is level.
If you want to build in your cabinet please note the following:
There must be at least 15 cm free space above the cabinet in order for the cooling system to work
satisfactorily.
There must be sufficient space at the hinge side to clean and replace the shelves and clean around
the hinge.
10
English